PRODUCT
DIE CUTTING AND CREASING MACHINE
Athena-106
FEATURE
FEEDER SECTION
- The design of pre-loading device is improved, it can use pre-loading cart, or also can move the stacking papers to feeder pile by manual forklift.
- Powerful suction feeder head with four lifting suckers and four forwarding suckers, feeding papers stably and smoothly.
- Special spiral blowing device makes paper forwarding smoothly.
FEEDER TABLE
- Tilting feeding table is more suitable for high speed paper transport and positioning of thin papers.
- Side positioning using pull and push side-lay devices, easy to switch for different sheets selection.
- Switchable speed reducing device, which is favorable for high speed positioning of thin papers.
DIE CUTTING SECTION
- Pneumatic locking system for die cutting board frame.
- The front-lay positioning can be micro-adjusted by four individual points for different paper conditions.
- Using advanced technology, the position of each gripper bar can be adjusted forward and backward to achieve accuracy requirements for product processing.
- Full sensor detection with HMI display to monitor the machine for troubleshooting.
WASTE STRIPPING SECTION (OPTIONAL)
- Triple synergistic waste removal device, the action is harmonious, accurate and powerful, can effectively clean variety of special-shaped wastes.
- Double deck drawer design, can install, discharge and adjust up and down stripping moulds and tools quickly.
- Use electric control lifting device for up deck.
DELIVERY SECTION
- Equip with security system for inspection personnel.
- Adjustable segmented brush and air blowing device to stabilize the paper stacking.
- With tension and buffer device for transmission chain of gripper bars.
FLOOR PLAN
-
Athena-106
FEEDER SECTION
FEEDER TABLE
DIE CUTTING SECTION
WASTE STRIPPING SECTION (OPTIONAL)
DELIVERY SECTION
SPECIFICATIONS
| Max. sheet size (L x W) | 750 x 1060 mm |
|---|---|
| Min. sheet size (L x W) | 350 x 400 mm | Sheet Thickness | 90 – 1800 g / sm cardboard，corrugated board≤4mm |
| Max. Machine Speed | 7500 Sheet / hour |
| Max. Die Cutting Size (L x W) | 720 x 1040 mm |
| Chase Inner Size (L x W) | 745 x 1080 mm |
| Steel Plate Size (L x W) | 736 x 1080 mm |
| Min. Gripper Margin | 8 mm |
| Max. Cutting Pressure | 300 tons |
| Power Required | 20 kw (CS) / 19 kw (C) |
| Machine Dimension (L x W x H) | 7075 x 4144 x 2356 mm (CS) / 6125 x 4144 x 2356 mm (C) |
| Machine Weight | 15.5 tons (CS) / 14 tons (C) |
| Specifications are subject to change without notice for improvement. | |
